LogTag Protective Enclosure LPE-01 - LogTag Recorders

LogTag Protective Enclosure LPE-01 - LogTag Recorders

reward points

Bulk Buy Discounts

Quantity PurchasedPrice
1 - 9£5.50
10 +£5.00

Product details

The LogTag Protective Enclosure LPE-01 is specifically designed for LogTag recorder products to allow use in harsh environments.

The design of the enclosure minimises the effects of thermal lag caused by the additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change for a given environment.

The enclosure’s case is made from high impact polycarbonate plastic and is clear to allow viewing of the enclosed recorder’s LCD or indicators. Conservatively rated at IP67 (equivalent to NEMA6).

Supported dataloggers: TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8, USRIC-8 products.

  • Technical Specification
    Part Order CodeLPE-01
    LogTag models supportedTRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8, USRIC-8
    Storage temperature range-40°C ~ +85°C
    Environmental protection ratingIP67 (equivalent to NEMA6) for temperatures 1°C~+40°C
    Case materialClear Polycarbonate with silicon rubber seal
    Chemical resistanceIn general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures.
    T90 thermal performanceWith TRIX-8 in 1 m/s air : T90 = ~ 10 minutes.
    With TRID30-7x in 1 m/s air : T90 = ~ 17minutes
    Size104mm (L- not including lug) x 76.5mm (W - including clips and hinge) x 13mm D
  • Product Downloads & Brochures

    For product information please click the links below: